In fact, it must be considered that there are two different types of contact interfaces for aviation interfaces: separable interfaces and fixed (permanent) interfaces. Separable interface diagram, due to the use of aviation connectors in the first place, has been specially mentioned. The fixed (permanent) interface is when both subsystems are connected to the aviation connector mentioned in the function definition. These interfaces are called fixed (permanent) interfaces because, in general, they are performed only once and are often used. Examples of fixed connections on the right and left sides of pressure and connection types of crimping type are included. Separable interfaces and have many fixed connections, including the differences between structures and requirements, and the common ground of their basic components. In both cases, and maintenance of the metal contact interface is needed to achieve our desired power requirements. In addition, in two cases, the metallic interface is manufactured by mechanical method. The separable interface is established in each cooperation of the connector. The contact force to the interface structure is mainly determined by the geometry, terminal, and contact with the coating.     The separable interface consists of a small connecting part less than 5cm, which is located under the contact force of the slightly rough surface. In this sense, the state sufficient to contact the interface shape will determine three important functional parameters of the connector: the contact resistance and the mating force and durability of the connector (for example, with the cooperation cycle, the support performance is still not degraded). Many fixed connection points belong to two basic categories: metallurgy and machinery. Metallurgical type, such as welding, includes the structure of the contact interface between the connector and the subsystem. Welding is the main gold connection at low temperature. High temperature welding is also used, and is increasingly used in smaller cables. Low temperature welding connection is very important for the production of printed circuit board assembly. And many components in the printed circuit board are welded, and the connector is one of the largest components. Welding and welding technology are two main: thermal insulation, pressure type and cover type fixed connection. Crimp type and below are mainly used for insulation for cable connection, pressure type connection is mainly used for printed circuit board with gold-plated holes, and cover type connection is used for plug-in printed circuit board.
    Dongguan Pengli Electronic Technology Co., Ltd. [Tel: 13549415001] is located in Dongguan, Guangdong Province, a world famous manufacturing city, focusing on the technical development and supporting application fields of aviation plugs and sockets. The main product series include gx12, GX16, GX20, gx25, ws16, ws20, WS24, ws28, etc After more than ten years of development, we are committed to building an excellent benchmark enterprise in the aviation plug-in industry. We sincerely welcome customers at home and abroad to visit and guide us. We are willing to develop together and create brilliance